The ATI Sunpower High Output T5 Pendant is a favorite among hobbyists who want top of the line performance at a lower cost
Delivery 1 week
Warning: Last items in stock!
The ATI Sunpower High Output T5 Pendant is a favorite among hobbyists who want top of the line performance at a lower cost. Like the ATI Powermodule the Sunpower features Miro Silver reflectors and an active cooling system for optimal performance and long tube life. The formed aluminum housing is both stylish and economical. We would be proud to have this fixture hanging over any tank, and we're confident you will be too.
Superior design and high-end components produce 50% more light than most equally-sized T5 fixtures. An active cooling system allows tubes to run at a more optimal temperature, improving both tube output and tube life.
The slim, silver colored body is lightweight, durable, rust-proof and just 60mm high. All components, including the T5 ballasts, are enclosed inside the fixture housing. The only items external to the fixture are a small junction box, two power cords, and an AC/DC adapter to power the fans.
Independent Lamp Control
Wired with two tubes on one power cord and remaining tubes on the other, allowing for independent control and dawn/dusk simulation.
Produces up to 50% more light than most other equally sized T5 fixtures, without using more energy.
Quiet, Cool Operation
Runs cool and produces virtually no noise.
• Individual Parabolic-style Reflectors made from Silver-coated 98% Reflective Aluminum
• Active Cooling System
• Built-in Electronic Ballasts
• Acrylic Shield
• 10-foot Power Cords (x2)
• Sleek, Adjustable 'Griplock' Style twic cable Hanging Kit included
• 2 year warranty
Optimized active cooling system
An active, regulated cooling in the Sunpower provides high performance cooling for the electronic digital ballasts (EVG) and the T5 tubes. They cool both, thereby the electronics are preserved and the T5 tubes are stabilized at an optimum temperature range, which results in an additional performance output increase of 15 -20 %.
The best reflective material on the market
ATI have decided to use the most superior reflecting materials on the market today. The reflector material has a total reflectivity of 98%. Normally polished aluminium reflectors has a reflectivity of 90-95 %. This means a further step in the efficiency increase in ATI T5 technology of + 5-10%.
Splash protector made of impact resistant acrylic.
No encrusted tubes and reflectors to be cleaned.
Operational Proximity To The Water Surface
Via the splash protection of the lights themselves the pendant can be located closer to the water surface, min 50mm, which also leads to an increase of illumination in the aquarium, thereby allowing a more efficient use of energy and higher degree of illumination (+10%).
Components supplied by brand named manufactures and assembled by a skilled workforce.
Dimensions & Weights
Length x Width x Height + Weight
4 x 24w 588 x 240 x 60mm 3.60kg
4 x 39w 888 x 240 x 60mm 4.50kg
4 x 54w 1188 x 240 x 60mm 4.75kg
4 x 80w 1488 x 240 x 60mm 6.10kg
6 x 24w 588 x 340 x 60mm 4.60kg
6 x 39w 888 x 340 x 60mm 5.70kg
6 x 54w 1188 x 340 x 60mm 6.80kg
6 x 80w 1488 x 340 x 60mm 8.00kg
8 x 24w 588 x 440 x 60mm 9.00kgs
8 x 39w 888 x 440 x 60mm 10.00kgs
8 x 54w 1188 x 440 x 60mm 13.0kgs
8 x 80w 1488 x 440 x 60mm 16.00kgs
Tubes are controlled in the following way.
4 Tube Units. Circuit 1, Tubes 1 & 3. Circuit 2, Tubes 2 & 4.
6 Tube Units. Circuit 1, Tubes 1 & 3 & 4 & 6. Circuit 2, Tubes 2 & 5.
8 Tube Units. Circuit 1, Tubes 1 & 2 & 4 & 5 & 7 & 8. Circuit 2, Tubes 3 & 6.
Tube choice is ultimately a matter of personal preference and what works for one, may not work for another. With that said here's a few of our customer's favorite combinations. In most cases these combinations typically give a nice white with touch of blue look. For a bluer look replace one of the Aquablue Special tubes with another Blue Plus tube.